Thermal Paper Quality Identification Methods

Nov 18, 2024 Leave a message

The principle of thermal paper: Thermal paper typically consists of three layers - a base layer of paper, a second layer of thermal sensitive coating, and a third protective layer. The quality of thermal paper is primarily influenced by the thermal sensitive coating or the protective layer.

20240909100614

If the coating on the thermal paper is uneven, it can result in varying print darkness, with some areas being too dark and others too light, significantly reducing print quality. If the chemical formulation of the thermal coating is not reasonable, it can lead to a short lifespan for the printed paper. High-quality thermal paper can be preserved for (up to 5 years under normal temperature conditions and away from direct sunlight), and there are now long-lasting thermal papers that can last for up to 10 years. However, if the formulation of the thermal coating is not reasonable, the paper may only be preserved for a few months.

The protective coating is also crucial for the preservation time after printing. It can absorb some of the light that causes chemical reactions in the thermal sensitive coating, slowing down the deterioration of the printed paper, and protecting the thermal elements of the printer from damage. However, if the protective coating is uneven, it will not only greatly reduce the protection of the thermal sensitive coating but may also cause small particles of the protective coating to fall off during the printing process, rubbing against the thermal elements of the printer, leading to damage to the thermal printing elements.

u212797866943355536fm253fmtautoapp138fJPEG

1. Appearance:

- If the paper is very white, it indicates an excessive amount of fluorescent powder in the protective and thermal sensitive coatings, making the paper less desirable. A better quality paper should have a slight greenish tint. Poor gloss or uneven appearance suggests an uneven coating. Strong reflective light also indicates too much fluorescent powder, suggesting lower quality.

2. Heat Test:

- A simple method is to use a lighter to heat the back of the paper. If the resulting color is brown, it suggests an unreasonable thermal formula that may lead to a shorter preservation time. If there are fine stripes or uneven color blocks in the black areas, it indicates an uneven coating. High-quality paper should turn a dark greenish-black after heating, with color blocks that are uniform and fade gradually from the center to the edges.

3. Sunlight Exposure Comparison:

- Apply a fluorescent pen to the printed paper and expose it to sunlight (to accelerate the reaction of the thermal coating to light). The paper that turns black quickly indicates a shorter preservation time.

4. Humidity Test:

- Place the thermal paper in a high-humidity environment (such as a sealed space controlled by a humidifier) and observe changes over time. Good quality thermal paper should maintain good print quality and color stability under high humidity, without blurring or fading. Rapid color change or illegible writing suggests poor moisture resistance.

5. Abrasion Resistance Test:

- Use a standard abrasion tester to rub the printed thermal paper multiple times, simulating friction encountered in daily use. High-quality thermal paper should withstand a certain number of rubs without significant fading or damage to the printed content, with the protective coating effectively preventing image blurring due to friction.

6. Printing Speed Compatibility:

- Test the thermal paper on different printers at various printing speeds to observe the reaction speed and print quality. High-quality thermal paper should be compatible with multiple printing speeds, maintaining clear and uniform print quality without noticeable color variations or incomplete printing due to speed changes.

7. Environmental Considerations:

- With increasing environmental awareness, consider the eco-friendliness of thermal paper. Check if the product has environmental certifications, such as FSC (Forest Stewardship Council), ensuring sustainable sourcing and minimal environmental impact during production and use. Also, understand the disposal methods, preferring recyclable or biodegradable thermal paper products.

By integrating these various identification methods, we can comprehensively assess the quality of thermal paper and select the best product that meets our specific needs.

Send Inquiry

Home

Phone

E-mail

Inquiry